X-Git-Url: https://git.shalnoff.com/BABOOSHKA.TV/blobdiff_plain/3f3b17215896c2bdf087384940ff257ee6a37648..refs/heads/master:/README.md?ds=sidebyside

diff --git a/README.md b/README.md
index c5c5010..4edf902 100644
--- a/README.md
+++ b/README.md
@@ -89,7 +89,7 @@ Update repository list and install dependencies
 
 Try to install freefonts (required by omxplayer)
 
-	apt install freefonts
+	apt install ttf-freefont
 
 By some reason recently *freefonts* package has been removed from official RPi repository. So in case of unsuccess just copy included freefonts to /usr/share/fonts/truetype/...  
 do it with *sudo*
@@ -121,8 +121,8 @@ First try to find you device using
 
 	irdb-get find YOUR_DEVICE  
 
-In case of unsiccess try to find and copy YOUR_DEVICE.conf for your remote controller to */etc/lirc/lircd.conf.d/* 
-Here is a [list of devices](http://lirc-remotes.sourceforge.net/remotes-table.html) supported by Lirc 'from the box'. However, you always can record your own, see below... 
+If you did it, copy YOUR_DEVICE.conf to */etc/lirc/lircd.conf.d/* 
+In case of unsiccess try to find and copy here: [List of devices](http://lirc-remotes.sourceforge.net/remotes-table.html) supported by Lirc 'from the box'. However, you always can record your own, see below... 
 
 Copy template lircd.conf
 
@@ -202,6 +202,7 @@ Create /usr/local/bin/irsend and make it executable
 
 	#! /bin/sh  
 	exec /usr/bin/irsend --device=/var/run/lirc/lircd-tx "$@"
+	chmod +x /usr/local/bin/irsend
 
 Start lircd-tx (with *sudo*)
 
@@ -249,6 +250,26 @@ Force raw record mode (normally not required)
 	
 	irrecord -f -d /dev/lirc0 ~/lirc.conf
 
+## IR remote setup and button assignment
+
+If everything went fine and your remote reading by Raspbery, you have to choose buttons that you going to use for Babooshka control. Here is a list of current commands: 
+
+- next
+- prev
+- forward +10min
+- backward -10min
+- play/pause toggle
+- pause on switching-off
+- stop
+- audio track switch
+- subtitles switch	
+
+This is how they marked in *remoteir.sh* 
+
+To assign comands you need to edit "ARR_DOWN", "ARR_UP" and so on in *remoteir.sh*. Change it for that you see in *irw* stdout when pressing buttons.
+
+	irw
+
 ## Main package installation
 
 	cd /home/pi/
@@ -285,7 +306,7 @@ Activate the service
 
 Add this line to */etc/rc.local*
 
-   sudo -H -u pi /home/pi/babooshka.tv/start.babooshka.sh > /dev/null &
+   sudo -H -u pi /home/pi/BABOOSHKA.TV/start.babooshka.sh > /dev/null &
 
 reboot and test :)
 
@@ -321,7 +342,7 @@ If' you're going to watch videos from YouTube, Vimeo and so on, this packages wo
 
 ## Usage
 
-converting video (note -level 3.0 option! it is required for RPi HW codec)
+converting video. Note *-level 3.0* option! it is required for RPi HW codec. I've been breaking by brain until found that RPi HW codec can't play *low profile* (or maybe it is driver limitation). However [here is](https://superuser.com/questions/489087/what-are-the-differences-between-h-264-profiles) some technical details, if you interested in. 
 
 	ffmpeg -i FILEIN -vcodec libx264 -preset slow -level 3.0 -b 700k -s 720x404 FILEOUT
 
@@ -375,6 +396,10 @@ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.
 
+## Donate 
+
+If you would like to contribute to a project, you can always [help with a penny](https://paypal.me/shalnov). 
+