README, minor corrections

[BABOOSHKA.TV] / README.md

diff --git a/README.md b/README.md
index c5c5010e4011b0d7589f52ebae96d411035a5a0c..4edf9025a7ca9fabac88142f1acd848ceb5292a8 100644 (file)
--- a/README.md
+++ b/README.md
@@ -89,7 +89,7 @@ Update repository list and install dependencies
 
 Try to install freefonts (required by omxplayer)
 
 
 Try to install freefonts (required by omxplayer)
 

-       apt install freefonts
+       apt install ttf-freefont

 
 By some reason recently *freefonts* package has been removed from official RPi repository. So in case of unsuccess just copy included freefonts to /usr/share/fonts/truetype/...  
 do it with *sudo*
 
 By some reason recently *freefonts* package has been removed from official RPi repository. So in case of unsuccess just copy included freefonts to /usr/share/fonts/truetype/...  
 do it with *sudo*


@@ -121,8 +121,8 @@ First try to find you device using
 
        irdb-get find YOUR_DEVICE  
 
 
        irdb-get find YOUR_DEVICE  
 

-In case of unsiccess try to find and copy YOUR_DEVICE.conf for your remote controller to */etc/lirc/lircd.conf.d/* 
-Here is a [list of devices](http://lirc-remotes.sourceforge.net/remotes-table.html) supported by Lirc 'from the box'. However, you always can record your own, see below... 
+If you did it, copy YOUR_DEVICE.conf to */etc/lirc/lircd.conf.d/* 
+In case of unsiccess try to find and copy here: [List of devices](http://lirc-remotes.sourceforge.net/remotes-table.html) supported by Lirc 'from the box'. However, you always can record your own, see below... 

 
 Copy template lircd.conf
 
 
 Copy template lircd.conf
 


@@ -202,6 +202,7 @@ Create /usr/local/bin/irsend and make it executable
 
        #! /bin/sh  
        exec /usr/bin/irsend --device=/var/run/lirc/lircd-tx "$@"
 
        #! /bin/sh  
        exec /usr/bin/irsend --device=/var/run/lirc/lircd-tx "$@"

+       chmod +x /usr/local/bin/irsend

 
 Start lircd-tx (with *sudo*)
 
 
 Start lircd-tx (with *sudo*)
 


@@ -249,6 +250,26 @@ Force raw record mode (normally not required)
        
        irrecord -f -d /dev/lirc0 ~/lirc.conf
 
        
        irrecord -f -d /dev/lirc0 ~/lirc.conf
 

+## IR remote setup and button assignment
+
+If everything went fine and your remote reading by Raspbery, you have to choose buttons that you going to use for Babooshka control. Here is a list of current commands: 
+
+- next
+- prev
+- forward +10min
+- backward -10min
+- play/pause toggle
+- pause on switching-off
+- stop
+- audio track switch
+- subtitles switch     
+
+This is how they marked in *remoteir.sh* 
+
+To assign comands you need to edit "ARR_DOWN", "ARR_UP" and so on in *remoteir.sh*. Change it for that you see in *irw* stdout when pressing buttons.
+
+       irw
+

 ## Main package installation
 
        cd /home/pi/
 ## Main package installation
 
        cd /home/pi/


@@ -285,7 +306,7 @@ Activate the service
 
 Add this line to */etc/rc.local*
 
 
 Add this line to */etc/rc.local*
 

-   sudo -H -u pi /home/pi/babooshka.tv/start.babooshka.sh > /dev/null &
+   sudo -H -u pi /home/pi/BABOOSHKA.TV/start.babooshka.sh > /dev/null &

 
 reboot and test :)
 
 
 reboot and test :)
 


@@ -321,7 +342,7 @@ If' you're going to watch videos from YouTube, Vimeo and so on, this packages wo
 
 ## Usage
 
 
 ## Usage
 

-converting video (note -level 3.0 option! it is required for RPi HW codec)
+converting video. Note *-level 3.0* option! it is required for RPi HW codec. I've been breaking by brain until found that RPi HW codec can't play *low profile* (or maybe it is driver limitation). However [here is](https://superuser.com/questions/489087/what-are-the-differences-between-h-264-profiles) some technical details, if you interested in. 

 
        ffmpeg -i FILEIN -vcodec libx264 -preset slow -level 3.0 -b 700k -s 720x404 FILEOUT
 
 
        ffmpeg -i FILEIN -vcodec libx264 -preset slow -level 3.0 -b 700k -s 720x404 FILEOUT
 


@@ -375,6 +396,10 @@ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.
 
 See the License for the specific language governing permissions and
 limitations under the License.
 

+## Donate 
+
+If you would like to contribute to a project, you can always [help with a penny](https://paypal.me/shalnov). 
+