--- /dev/null
+playlist
+currentpos
+currenttrack
+VIDEO/
+YOUTUBE/
--- /dev/null
+# [babooshka.tv](https://babooshka.tv) old-school tv-box video player
+
+This simple and lightweight package could turn your RPi into a video player. The package is designed primarily for your grandparents, for whom the use of a computer is a difficult task. You can upload your home kittens-kids videos or add videos from Youtube/Vimeo that you like.
+
+The package is fully written in bash.
+
+
+
+## Wiring
+
+[Pi Zero IO Pinout](https://pinout.xyz/pinout/io_pi_zero)
+
+The yellow LED connected to +3,3v via 470R
+
+ GPIO 0 BCM17 LED green, booting
+ GPIO 2 BCM27 LED red, video status
+
+Lowering resistors are required for all diodes (Red LEDs normally brighter, so I would recommend ~470R for yellow and green and about 1K for red)
+
+### Infrared interface
+
+ GPIO 3 BCM22 IR TX
+ GPIO 4 BCM23 IR RX
+
+ 38kHz -- most popular
+
+ +-----------------------+ 3
+ | data -> +---------------------o +3.3V
+ | ______________ |
+ | / |
+ | ( | 2
+ | \______________ + +---------------------o GND
+ | |
+ | | 1
+ | - +---------------------o GPIO 4 (BCM23)
+ +-----------------------+
+
+
+ 950nm emitting diode (e.g. TSUS5400)
+
+ +5V
+ o
+ |
+ | | 51 Ohm (depending on MOSFET maybe not required)
+ |_|
+ |
+ _|_
+ \ /
+ --- --> IR LED
+ |
+ MOSFET |
+ ___ |---'
+ o-----|___|-----|
+ 10K |->--
+ GPIO 3 (BCM22) |
+ |
+ ----- GND
+ ---
+ -
+
+### Analog Audio
+
+ GPIO 1 BCM18 R AUDIO
+ GPIO 23 BCM13 L AUDIO
+
+
+Picture taken [from here](https://shallowsky.com/blog/hardware/pi-zero-audio.html), thanks :)
+
+### Analog video pin
+
+
+Picture taken [from here](https://magpi.raspberrypi.org/articles/rca-pi-zero), thanks :)
+
+## Setup
+
+Download, copy to microSD and install oficial [Raspberry Pi OS Lite image](https://www.raspberrypi.org/downloads/raspberry-pi-os/)
+
+The procedure of adding a login and password for your access point, as well as the ssh configuration is omitted. It is assumed that you know how to do so :)
+If you not sure, [ddg it](https://duckduckgo.com/?q=RPi+headless+how+setup+and+ssh).
+
+Further operations are performed on device.
+
+ ssh <your RPi device>
+
+Update repository list and install dependencies
+
+ apt update
+ apt install mc fbi omxplayer sox
+
+Try to install freefonts (required by omxplayer)
+
+ apt install freefonts
+
+By some reason recently *freefonts* package has been removed from official RPi repository. So in case of unsuccess just copy included freefonts to /usr/share/fonts/truetype/...
+do it with *sudo*
+
+ cp -r freefont /usr/share/fonts/truetype/freefont
+ chown root:root /usr/share/fonts/truetype/freefont
+ chown root:root /usr/share/fonts/truetype/freefont/*
+
+### IR interface setup
+
+ apt install lirc
+
+edit /etc/lirc/hardware.conf
+
+ # Run "lircd --driver=help" for a list of supported drivers.
+ DRIVER="default"
+
+ # usually /dev/lirc0 is the correct setting for systems using udev
+ DEVICE="/dev/lirc1"
+ MODULES="gpio_ir_recv"
+
+edit /etc/lirc/lirc_options.conf
+NOTE! add new line in the end of the file !!!! [known bug](https://forum.odroid.com/viewtopic.php?t=32181)
+
+ driver = default
+ device = /dev/lirc1
+
+First try to find you device using
+
+ irdb-get find YOUR_DEVICE
+
+In case of unsiccess try to find and copy YOUR_DEVICE.conf for your remote controller to */etc/lirc/lircd.conf.d/*
+Here is a [list of devices](http://lirc-remotes.sourceforge.net/remotes-table.html) supported by Lirc 'from the box'. However, you always can record your own, see below...
+
+Copy template lircd.conf
+
+ cp /etc/lirc/lircd.conf.dist /etc/lirc/lircd.conf
+
+Make changes in */boot/config.txt* to set up PAL video output and run appropriate kernel overlays for IR interface:
+
+ disable_splash=1
+
+ # disable_overscan=1
+
+ framebuffer_width=720
+ framebuffer_height=576
+
+ # enable PWM audio (add this line)
+ dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4
+
+ # uncomment for composite PAL
+ sdtv_mode=2
+
+ # uncomment if hdmi display is not detected and composite is being output
+ # hdmi_force_hotplug=1
+
+ # Uncomment this to enable the gpio-ir module
+ dtoverlay=gpio-ir,gpio_pin=23,gpio_pull=up
+ dtoverlay=gpio-ir-tx,gpio_pin=22
+
+### Make IR works as TX and RX simultanoiously
+
+This part taken from [this GitHub comment](https://github.com/raspberrypi/linux/issues/2993#issuecomment-497420228) thank you [@elmicha](https://github.com/elmicha) :)
+
+Add these rules in */etc/udev/rules.d/71-lirc.rules* to get stable */dev/lirc-rx* and */dev/lirc-tx* device names:
+
+ ACTION=="add", SUBSYSTEM=="lirc", DRIVERS=="gpio_ir_recv", SYMLINK+="lirc-rx"
+ ACTION=="add", SUBSYSTEM=="lirc", DRIVERS=="gpio-ir-tx", SYMLINK+="lirc-tx"
+ ACTION=="add", SUBSYSTEM=="lirc", DRIVERS=="pwm-ir-tx", SYMLINK+="lirc-tx"
+
+Change the device and listening address in /etc/lirc/lirc_options.conf:
+
+ device = /dev/lirc-rx
+ listen = 0.0.0.0:8766
+
+Copy lirc_options.conf to lirc_tx_options.conf and edit these lines:
+
+ device = /dev/lirc-tx
+ output = /var/run/lirc/lircd-tx
+ pidfile = /var/run/lirc/lircd-tx.pid
+ listen = 0.0.0.0:8765
+ connect = 127.0.0.1:8766
+
+Create */etc/systemd/system/lircd-tx.service* (from the output of *systemctl cat lircd*) and edit it like this:
+
+ [Unit]
+ Documentation=man:lircd(8)
+ Documentation=http://lirc.org/html/configure.html
+ Description=Second lircd, the transmitter
+ Wants=lircd-setup.service
+ After=network.target lircd-setup.service lircd.service
+
+ [Service]
+ Type=simple
+ ExecStart=/usr/sbin/lircd --nodaemon --options-file /etc/lirc/lirc_tx_options.conf
+
+ [Install]
+ WantedBy=multi-user.target
+ Create /etc/systemd/system/lircd-tx.socket (from the output of systemctl cat lircd.socket) and edit it:
+
+ [Socket]
+ ListenStream=/run/lirc/lircd-tx
+
+ [Install]
+ WantedBy=sockets.target
+ Also=lircd-tx.service
+
+
+Create /usr/local/bin/irsend and make it executable
+
+ #! /bin/sh
+ exec /usr/bin/irsend --device=/var/run/lirc/lircd-tx "$@"
+
+Start lircd-tx (with *sudo*)
+
+ systemctl daemon-reload
+ systemctl start lircd-tx
+ systemctl enable lircd-tx
+
+Enable RX (with *sudo*)
+ systemctl enable lircd.service
+ systemctl enable lircd.socket
+
+ systemctl restart lircd
+
+NOTE: there maybe the Warning of duplication of "begin remote .. end remote", it is fine. Ignore it.
+
+Reboot and check status :)
+
+ systemctl reboot
+
+ systemctl status lircd.service
+ systemctl status lircd.socket
+
+### Test IR
+
+Send some command. replace vendor and command with your
+
+ irsend SEND_ONCE SONY-TV KEY_1
+
+Read RX
+ irw
+
+Record your own (if you have no compatible remote control or incomplete config)
+
+ systemctl stop lircd.socket
+ systemctl stop lircd.service
+
+ record with own key names
+ irrecord --disable-namespace
+
+ systemctl start lircd.socket
+ systemctl start lircd.service
+
+Force raw record mode (normally not required)
+
+ irrecord -f -d /dev/lirc0 ~/lirc.conf
+
+## Main package installation
+
+ cd /home/pi/
+ git clone <this repo> (see above)
+ cd BABOOSHKA.TV/
+
+Make sure that all .sh files inside are executable (have x flag)
+
+ ls --all
+
+if required make them *chmod +x *.sh*
+
+### Early stage systemd service (launching led driver and creating splash image)
+
+Create */etc/systemd/system/splash.service* file and add there
+
+ [Unit]
+ DefaultDependencies=no
+ After=local-fs.target
+
+ [Service]
+ StandardInput=tty
+ StandardOutput=tty
+ ExecStart=/home/pi/BABOOSHKA.TV/early_init.sh
+
+ [Install]
+ WantedBy=sysinit.target
+
+Activate the service
+
+ sudo systemctl enable splash.service
+
+### On boot launcher
+
+Add this line to */etc/rc.local*
+
+ sudo -H -u pi /home/pi/babooshka.tv/start.babooshka.sh > /dev/null &
+
+reboot and test :)
+
+ systemctl reboot
+
+if everything has been done properly, you will see the splash babooshka.tv logo
+
+- add testing video in *~/BABOOSHKA.TV/VIDEO/* directory
+- check playlist (that the video link has been added)
+- click PLAY on your remote
+- if something went wrong, see Debug section below
+
+## Cosmetic polishing
+
+Edit */boot/cmdline.txt*. Make sure that you have *console=tty3 quiet consoleblank=0* and *logo.nologo*, this is my cmdline:
+
+ console=serial0,115200 console=tty3 quiet consoleblank=0 loglevel=1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait logo.nologo
+
+Disable blinking cursor (probably not required)
+
+ vt.global_cursor_default=0
+
+Remove tty login service to eliminate blinking cursor
+
+ sudo systemctl disable getty@tty1
+
+## Additional software
+
+If' you're going to watch videos from YouTube, Vimeo and so on, this packages would be required. Most porbably probably would beed to install youtube-dl globally. So do that with *sudo -H ...*. It would be recommended wor futher compatibility.
+
+ apt install mkvtoolnix python-pip
+ pip install -U youtube-dl
+
+## Usage
+
+converting video (note -level 3.0 option! it is required for RPi HW codec)
+
+ ffmpeg -i FILEIN -vcodec libx264 -preset slow -level 3.0 -b 700k -s 720x404 FILEOUT
+
+upload new video from local PC
+
+ scp <your_super_cool_kitten_flick.mp4> <babooshka>:BABOOSHKA.TV/VIDEO/
+
+download new video from youtube (on device)
+
+ youtube-dl -f 'bestvideo[vcodec=avc1][height<=720]+bestaudio/best[abr<=120]' --merge-output-format mp4 -o '%(playlist_index)s - %(title)s.%(ext)s' <youtube link>
+
+click PLAY button and enjoy :)
+
+## Debug
+
+ tail -F /tmp/babooshka.log
+
+## Known bugs
+
+- Not changing the state on finish (WATCHED) if video has been resumed (time of resuming is disregarded)
+
+## Todo
+
+- WiFi auto-reconnect, probably *sudo iw dev wlan0 set power_save off* would be helpful
+- youtube-dl, autoupdate
+- youtube-dl download from downloadlist
+- check free storage space
+- auto removing of old videos + commenting in playlist
+- splash info, Nth video from COUNT videos
+- Make a single package
+
+## Extras
+
+Download this nice babooshka.tv [sticker and logo](https://repository.interplaymedium.org/babooshka.tv/babooshka_sticker.svg)
+
+
+
+## License
+
+Copyright © 2020 Dmitry Shalnov [interplaymedium.org]
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this files except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+
+
+
--- /dev/null
+#!/bin/bash
+
+#set -x
+
+OMXPLAYER_DBUS_ADDR="/tmp/omxplayerdbus.${USER:-root}"
+OMXPLAYER_DBUS_PID="/tmp/omxplayerdbus.${USER:-root}.pid"
+
+# OMXPLAYER_DBUS_ADDR="/tmp/omxplayerdbus.pi"
+# OMXPLAYER_DBUS_PID="/tmp/omxplayerdbus.pi.pid"
+
+export DBUS_SESSION_BUS_ADDRESS=`cat $OMXPLAYER_DBUS_ADDR`
+export DBUS_SESSION_BUS_PID=`cat $OMXPLAYER_DBUS_PID`
+
+[ -z "$DBUS_SESSION_BUS_ADDRESS" ] && { echo "Must have DBUS_SESSION_BUS_ADDRESS" >&2; exit 1; }
+
+case $1 in
+ status)
+ duration=`dbus-send --print-reply=literal --session --reply-timeout=500 --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.freedesktop.DBus.Properties.Get string:"org.mpris.MediaPlayer2.Player" string:"Duration"`
+ [ $? -ne 0 ] && exit 1
+ duration="$(awk '{print $2}' <<< "$duration")"
+
+ position=`dbus-send --print-reply=literal --session --reply-timeout=500 --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.freedesktop.DBus.Properties.Get string:"org.mpris.MediaPlayer2.Player" string:"Position"`
+ [ $? -ne 0 ] && exit 1
+ position="$(awk '{print $2}' <<< "$position")"
+
+ playstatus=`dbus-send --print-reply=literal --session --reply-timeout=500 --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.freedesktop.DBus.Properties.Get string:"org.mpris.MediaPlayer2.Player" string:"PlaybackStatus"`
+ [ $? -ne 0 ] && exit 1
+ playstatus="$(sed 's/^ *//;s/ *$//;' <<< "$playstatus")"
+
+ paused="true"
+ [ "$playstatus" == "Playing" ] && paused="false"
+ echo "Duration: $duration"
+ echo "Position: $position"
+ echo "Paused: $paused"
+ ;;
+
+ volume)
+ volume=`dbus-send --print-reply=double --session --reply-timeout=500 --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.freedesktop.DBus.Properties.Set string:"org.mpris.MediaPlayer2.Player" string:"Volume" ${2:+double:}$2`
+ [ $? -ne 0 ] && exit 1
+ volume="$(awk '{print $2}' <<< "$volume")"
+ echo "Volume: $volume"
+ ;;
+
+ list) # list dbus interfaces
+
+ dbus-send --session --dest=org.freedesktop.DBus --type=method_call --print-reply /org/freedesktop/DBus org.freedesktop.DBus.ListNames
+# dbus-send --print-reply=literal --type=method_call --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.freedesktop.DBus.Introspectable.Introspect
+ ;;
+
+ pause)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:16 >/dev/null
+ ;;
+
+ info) # doesn't work IMHO
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:5
+ ;;
+
+ action) # universal
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:$2 >/dev/null
+ ;;
+
+# -----------------------------------------------
+
+ subslist)
+ subslist=`dbus-send --print-reply --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.ListSubtitles`
+# [ $? -ne 0 ] && exit 1
+ echo "$subslist" | grep string
+ ;;
+
+ togglesubtitles)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:12 >/dev/null
+ ;;
+
+ hidesubtitles)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:30 >/dev/null
+ ;;
+
+ showsubtitles)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:31 >/dev/null
+ ;;
+ subsnext)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:11 >/dev/null
+ ;;
+ subsprev)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:10 >/dev/null
+ ;;
+
+# -----------------------------------------------
+
+ audiolist)
+ audiolist=`dbus-send --print-reply --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.ListAudio`
+# [ $? -ne 0 ] && exit 1
+ echo "$audiolist" | grep string
+ ;;
+
+ audiom)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:6 >/dev/null
+ ;;
+
+ audiop)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:7 >/dev/null
+ ;;
+
+# -----------------------------------------------
+
+ seekfl) # seek forward large step
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:22 >/dev/null
+ ;;
+
+ seekbl) # seek backward large step
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:21 >/dev/null
+ ;;
+
+ seekf) # seek forward large step
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:20 >/dev/null
+ ;;
+
+ seekb) # seek backward large step
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:19 >/dev/null
+ ;;
+
+# -----------------------------------------------
+
+ stop)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:15 >/dev/null
+ ;;
+
+ seek)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Seek int64:$2 >/dev/null
+ ;;
+
+ setposition)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.SetPosition objpath:/not/used int64:$2 >/dev/null
+ ;;
+
+ setalpha)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.SetAlpha objpath:/not/used int64:$2 >/dev/null
+ ;;
+
+ setvideopos)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.VideoPos objpath:/not/used string:"$2 $3 $4 $5" >/dev/null
+ ;;
+
+ setvideocroppos)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.SetVideoCropPos objpath:/not/used string:"$2 $3 $4 $5" >/dev/null
+ ;;
+
+ setaspectmode)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.SetAspectMode objpath:/not/used string:"$2" >/dev/null
+ ;;
+
+ hidevideo)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:28 >/dev/null
+ ;;
+
+ unhidevideo)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:29 >/dev/null
+ ;;
+
+ volumeup)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:18 >/dev/null
+ ;;
+
+ volumedown)
+ dbus-send --print-reply=literal --session --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Action int32:17 >/dev/null
+ ;;
+
+ getsource)
+ source=$(dbus-send --print-reply=literal --session --reply-timeout=500 --dest=org.mpris.MediaPlayer2.omxplayer /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.GetSource)
+ echo "$source" | sed 's/^ *//'
+ ;;
+ *)
+ echo "usage: $0 status|pause|stop|seek|volumeup|volumedown|setposition [position in microseconds]|hidevideo|unhidevideo|togglesubtitles|hidesubtitles|showsubtitles|setvideopos [x1 y1 x2 y2]|setvideocroppos [x1 y1 x2 y2]|setaspectmode [letterbox,fill,stretch,default]|setalpha [alpha (0..255)]|getsource" >&2
+ exit 1
+ ;;
+esac
--- /dev/null
+#!/bin/bash
+
+export BABOOSHKA_HOME=/home/pi/BABOOSHKA.TV/
+
+# run booting led and led daemon
+$BABOOSHKA_HOME/leds.sh 2>&1 >/dev/null &
+
+# show splash image
+/usr/bin/fbi -d /dev/fb0 --once --noverbose --autozoom $BABOOSHKA_HOME/splash.png
+
+exit 0
--- /dev/null
+#!/bin/bash
+
+echo "leds on"
+
+LEDS_CONTROL=/tmp/bbshk_leds
+LED_BOOT=2
+LED_VIDEO=0
+
+# touch $LEDS_CONTROL
+# gpio write $LED_BOOT 1
+
+gpio mode 0 out # II green
+gpio mode 2 out # III red
+
+while [ 1 ]; do
+
+ LEDS_STATE=$(cat $LEDS_CONTROL)
+
+ case "$LEDS_STATE" in
+ "BOOTCOMPLETE")
+ gpio write $LED_BOOT 1
+ ;;
+
+ "NEWVIDEO")
+ if [ -z $ONOFF ]; then
+ gpio write $LED_VIDEO 0
+ ONOFF=1
+ else
+ gpio write $LED_VIDEO 1
+ ONOFF=''
+ fi
+ ;;
+
+ "VIDEOSTARTED")
+ gpio write $LED_VIDEO 1
+ ;;
+
+ "VIDEOCOMPLETE")
+ gpio write $LED_VIDEO 0
+ ;;
+
+ *) # booting
+ echo $LEDS_STATE
+ if [ -z $ONOFF ]; then
+ gpio write $LED_BOOT 0
+ ONOFF=1
+ else
+ gpio write $LED_BOOT 1
+ ONOFF=''
+ fi
+ ;;
+ esac
+
+ sleep 0.5s
+done
--- /dev/null
+#!/bin/bash
+
+if [ $# -lt 1 ]; then
+
+ echo "IM Playlist Player. Created for BABOOSHKA.TV™ project (https://babooshka.tv)"
+ echo "Copyright © 2020 Dmitry Shalnov [interplaymedium.org]"
+ echo "Licensed under the Apache License, Version 2.0"
+
+ echo "Usage: $0 -p <playlist> [options]"
+ echo "-v <arg> volume amp in dB>"
+ echo "-f <arg> play from Nth file in the playlist"
+ echo "-a <erg> set audio track"
+ echo "-m <arg> video mode in WxH format"
+ echo "-t <arg> subtitle track number"
+ echo "-s stop after"
+ echo "-o play list once (make sence if you're not using -s option)"
+ echo "Dependences: omxplayer, ttf-freefont"
+ echo "Playlist format (using TAB delimiter): <file with path (no escapes)> [comment] [additional options] [position] [state]"
+ echo "Use ';' symbol to comment playlist lines if needed"
+ exit 1
+fi
+
+# BABOOSHKA_HOME=/home/pi # assigned in start.babooshka.sh
+
+SAVE_PATH=$BABOOSHKA_HOME
+DBUS_CTRL_FILE=/tmp/dbuscontrol_command
+VOLUME=0
+LEDS_CONTROL=/tmp/bbshk_leds
+CNT=1
+
+# ------------------- parse commandline ----------------------
+
+parserCnt=0
+
+while [ "$#" -gt 0 ] && [ "$parserCnt" -lt 20 ] ; do
+ case "$1" in
+# -i) MEDIAPATH="$2"; shift 2;; # media file
+ -p) PLAYLIST="$2"; shift 2;; # media file
+ -v) VOLUME="$2"; shift 2;; # volume amp
+ -f) START_FROM="$2"; shift 2;; # from Nth file, 0 is random order
+ -a) PREF_LANG="$2"; shift 2;; # audio track prefered language pattern, e.g. ":ру|:ru"
+ -m) VIDEOMODE="$2"; shift 2;; # video mode
+ -t) SUBTITLES="$2"; shift 2;; # volume amp
+ -s) PLAYSINGLE=1; shift 1;; # play file by file with stops (no parameter required)
+ -o) PLAYLISTONCE=1; shift 1;; # play list once (no parameter required)
+
+ -*) echo "unknown option: $1" >&2; exit 1;;
+# *) handle_argument "$1"; shift 1;;
+ *) sleep 0; shift 1;;
+ esac
+ parserCnt=$(( $parserCnt + 1 ))
+done
+
+if [ "$SUBTITLES" != "" ]; then SUBTITLES_SET="-t $SUBTITLES"; fi
+
+if [ -z "$PLAYLIST" ]; then
+ echo "Playlist is not assigned. Please use -p option."
+ exit 0
+fi
+
+# -------------------------------------------------------------------
+
+killCCONTROL() { # function called by trap (Ctrl-C handler)
+
+ kill -9 $WAIT1_PID 2>/dev/null
+ kill -9 $WAIT2_PID 2>/dev/null
+ kill -9 $WAIT3_PID 2>/dev/null
+ kill -9 $PLAYLIST_CHANGE_PID 2>/dev/null
+ echo "Have a nice day..."
+ exit 0
+}
+
+trap 'killCCONTROL' 2
+
+waiting_for_press_play() {
+ echo "waiting for PLAY button press... ";
+ while [ "$DBUS_COMMAND" != "PLAY" ]; do
+ DBUS_COMMAND=$(cat $DBUS_CTRL_FILE)
+# echo -n "."
+ sleep 1
+ done
+# echo ''
+}
+
+waiting_for_player_start() {
+ echo "waiting for playback starting... ";
+ while ! ./dbuscontrol.sh status 1>/dev/null 2>/dev/null ; do
+# echo -n "+"
+ sleep 1
+ done
+# echo ''
+}
+
+# check for unwatched / not completed video and turn RED LED on
+
+check_video_complete(){
+
+ if grep -v -P "\tPLAY|\tWATCHED" "$1" | grep "^[^#;]" >/dev/null ; then
+
+ lastLedState=$(cat $LEDS_CONTROL)
+ currentPos=$(cat $SAVE_PATH/currentpos)
+
+ # make new video current (if previous one has not been paused and all videos has been watched)
+
+ if [ "$lastLedState" == "VIDEOCOMPLETE" ] && [ "$currentPos" == '' ]; then
+ newVideo=$(grep -v -P "\tPLAY|\tWATCHED" "$1" | grep "^[^#;]" | head -1 | awk '{split($0,a,"\t"); print a[1]}')
+ echo $newVideo > $SAVE_PATH/currenttrack
+ echo "Playlist changed: $newVideo"
+ fi
+
+# echo 'NEWVIDEO'
+ echo "NEWVIDEO" > "$LEDS_CONTROL"
+ else
+ if grep -P "\tPLAY" "$1" | grep "^[^#;]" >/dev/null ; then
+# echo 'VIDEOSTARTED'
+ echo "VIDEOSTARTED" > "$LEDS_CONTROL"
+ else
+# echo 'VIDEOCOMPLETE'
+ echo "VIDEOCOMPLETE" > "$LEDS_CONTROL"
+ fi
+ fi
+}
+
+# check_video_complete "$PLAYLIST"
+
+# background checking for external playlist changes
+
+{
+ while [ 1 ]; do
+ check_video_complete "$PLAYLIST"
+ sleep 10
+ done
+} &
+PLAYLIST_CHANGE_PID=$!
+
+# ----------------------- crash / reboot handler --------------------
+
+touch "$DBUS_CTRL_FILE"
+touch $SAVE_PATH/currenttrack
+touch $SAVE_PATH/currentpos
+
+currentTrack=$(cat $SAVE_PATH/currenttrack)
+currentPos=$(cat $SAVE_PATH/currentpos)
+
+echo "Saved track: $currentPos, $currentTrack"
+
+if [ "$START_FROM" == '' ]; then
+
+ if [ "$currentTrack" != '' ]; then
+
+ currentTrackNum=$( cat $PLAYLIST | grep "^[^#;]" | grep -Fn "$currentTrack" | cut -f1 -d: ) # looking for current track in playlist and return number of it
+
+ if [ "$currentTrackNum" != "" ]; then # playlist has been updated
+ CNT=$currentTrackNum;
+ echo "Current track number: $CNT"
+ fi
+
+ if [ "$currentTrackNum" != '' ] && [ "$currentPos" != '' ]; then
+
+ currentPos=$(( $currentPos / 60 ))
+ echo "restarting from $currentPos min : $CNT : $currentTrack"
+ POSITION_SET="-s $currentPos"
+
+ {
+ echo "waiting for player start.."
+ waiting_for_player_start
+
+ # trick to make still picture visible
+
+ ./dbuscontrol.sh pause
+ echo "paused"
+ sleep 10
+ ./dbuscontrol.sh pause
+ sleep 0.1
+ ./dbuscontrol.sh pause
+
+ } &
+ WAIT1_PID=$!
+ else
+ waiting_for_press_play
+ fi
+ else
+ waiting_for_press_play
+ fi
+else
+ CNT=$START_FROM
+ waiting_for_press_play
+fi
+
+# --------------------- main loop start -----------------------------
+
+while [ 1 ]; do
+
+ totalLines=$(cat $PLAYLIST | grep "^[^#;]" | wc -l)
+ playlistLine=$(cat $PLAYLIST | grep "^[^#;]" | head -$CNT | tail -1)
+
+ echo "playlistLine: $CNT, $playlistLine"
+
+ if echo $playlistLine | grep "^[^#;]" >/dev/null; then
+
+ fileState=$(echo "$playlistLine" | awk '{split($0,a,"\t"); print a[5]}')
+
+ # show splash
+
+ case "$fileState" in
+ "PLAY")
+ sudo fbi -T 3 -d /dev/fb0 --once -noverbose splash_loading_pause.png &>/dev/null
+ ;;
+ '')
+ sudo fbi -T 3 -d /dev/fb0 --once -noverbose splash_loading_new.png &>/dev/null
+ ;;
+ *)
+ sudo fbi -T 3 -d /dev/fb0 --once -noverbose splash_loading.png &>/dev/null
+ ;;
+ esac
+
+ file=$(echo "$playlistLine" | awk '{split($0,a,"\t"); print a[1]}')
+ fileComment=$(echo "$playlistLine" | awk '{split($0,a,"\t"); print a[2]}')
+ fileOptions=$(echo "$playlistLine" | awk '{split($0,a,"\t"); print a[3]}')
+
+ echo "Loading: $CNT/$totalLines : $file"
+ echo "Commentary: $fileComment"
+ echo "Additional options: $POSITION_SET $fileOptions"
+
+ echo $file > $SAVE_PATH/currenttrack
+
+ if [ "$PREF_LANG" != "" ]; then
+ {
+ echo "prefered language (pattern): $PREF_LANG"
+ waiting_for_player_start
+ audioTracks=$( $BABOOSHKA_HOME/dbuscontrol.sh audiolist 2>/dev/null )
+ prefAudioTrackNum=$( echo "$audioTracks" | awk -v var=$PREF_LANG 'tolower($0) ~ var {print NR; exit }' )
+
+ if [ "$prefAudioTrackNum" != "" ]; then
+ i=1
+ while [ "$i" -lt "$prefAudioTrackNum" ] ; do
+ i=$(( $i + 1 ))
+ $BABOOSHKA_HOME/dbuscontrol.sh audiop
+ done
+ targetTrackName=$(echo "$audioTracks" | head -$prefAudioTrackNum | tail -1 )
+ echo "audio track $prefAudioTrackNum : $targetTrackName"
+ else
+ echo "probably single audiotrack detected:"
+ echo "$audioTracks"
+ fi
+ } &
+ WAIT2_PID=$!
+ fi
+
+ {
+ waiting_for_player_start
+ sudo fbi -T 3 -d /dev/fb0 --once -noverbose splash.png &>/dev/null
+ } &
+ WAIT3_PID=$!
+
+ # set playlist marker before playing
+
+ if cat "$PLAYLIST" | grep "^[^#;]" | grep "$file" | grep -v -P "\tWATCHED" >/dev/null; then
+
+ sed -i "s|\tPLAY||g" "$PLAYLIST"
+ newPlaylistLine=$(cat "$PLAYLIST" | grep "^[^#;]" | grep "$file" | awk -F"\t" -v pbState="PLAY" '{print $1"\t"$2"\t"$3"\t"$4"\t"pbState}')
+ sed -i "s|^$file.*|${newPlaylistLine}|g" "$PLAYLIST"
+ fi
+
+ # playing
+
+ echo "VIDEOSTARTED" > "$LEDS_CONTROL"
+ echo 'playing...'
+
+ playerOutput=$(./playmovie.sh -i "$file" -v $VOLUME -a 1 -m "$VIDEOMODE" $POSITION_SET $SUBTITLES_SET -r letterbox $fileOptions)
+
+ # set playlist markers after playing
+
+ if cat "$PLAYLIST" | grep "^[^#;]" | grep "$file" | grep -v -P "\tWATCHED" >/dev/null; then
+
+ playbackPos=$(echo "$playerOutput" | grep "Playback duration" | awk -F: '{print $2}' | xargs) # whether it was stopped and what time
+
+ ct=$(echo $playbackPos | awk -F'/' '{print $1}')
+ tt=$(echo $playbackPos | awk -F'/' '{print $2}')
+
+ if [ "$ct" -ge "$tt" ]; then watched='WATCHED'; else watched=''; fi
+
+ newPlaylistLine=$(cat "$PLAYLIST" | grep "^[^#;]" | grep "$file" | awk -v pbPos="$playbackPos" -v pbState="$watched" -F"\t" '{print $1"\t"$2"\t"$3"\t"pbPos"\t"pbState}')
+ sed -i "s|^$file.*|${newPlaylistLine}|g" "$PLAYLIST"
+
+ echo "playlist line updated: $newPlaylistLine"
+ fi
+
+ # check for unwatched / not completed video and turn RED LED on
+
+ check_video_complete "$PLAYLIST"
+
+ : > $SAVE_PATH/currentpos
+ POSITION_SET=''
+
+ DBUS_COMMAND=$(cat "$DBUS_CTRL_FILE")
+
+ if [ "$PLAYSINGLE" != "" ] && [ "$DBUS_COMMAND" != "NEXT" ]; then
+ echo "play single STOP"
+ echo "STOP" > "$DBUS_CTRL_FILE";
+ DBUS_COMMAND="STOP"
+ CNT=$(( $CNT + 1 ));
+ fi
+
+ else
+# if [ "$DBUS_COMMAND" == "PLAY" ]; then CNT=$(( $CNT + 1 )); fi
+ DBUS_COMMAND="NEXT"
+ fi
+
+ # check playlist for finishing
+
+ echo "DBus command: $DBUS_COMMAND"
+
+ totalLines=$(cat $PLAYLIST | grep "^[^#;]" | wc -l)
+
+ if [ "$PLAYLISTONCE" != '' ] && [ "$CNT" -ge "$totalLines" ] && [ "$DBUS_COMMAND" != "PREV" ]; then
+ echo "play once STOP"
+ echo "STOP" > "$DBUS_CTRL_FILE"
+ DBUS_COMMAND="STOP"
+ CNT=$(( $CNT + 1 ));
+ fi
+
+ # handle and pass dbus command (original or assigned forcibly)
+
+ echo "DBus command: $DBUS_COMMAND"
+
+ if [ "$DBUS_COMMAND" != "" ]; then
+ case "$DBUS_COMMAND" in
+ "NEXT")
+ CNT=$(( $CNT + 1 ));
+ ;;
+ "STOP")
+ waiting_for_press_play
+
+ # check for possibly new video in playlist
+
+ currentLEDState=$(cat $LEDS_CONTROL)
+
+ if [ "$currentLEDState" == "NEWVIDEO" ]; then
+ newVideo=$(grep -v -P "\tPLAY|\tWATCHED" "$PLAYLIST" | grep "^[^#;]" | head -1 | awk '{split($0,a,"\t"); print a[1]}')
+ echo $newVideo > $SAVE_PATH/currenttrack
+
+ CNT=$( cat "$PLAYLIST" | grep "^[^#;]" | grep -Fn "$newVideo" | cut -f1 -d: )
+ totalLines=$(cat "$PLAYLIST" | grep "^[^#;]" | wc -l)
+ echo "New track detected: $CNT, $newVideo"
+ fi
+
+ ;;
+ "PREV")
+ CNT=$(( $CNT - 1 ));
+ ;;
+ esac
+ : > "$DBUS_CTRL_FILE"
+ else
+ CNT=$(( $CNT + 1 ))
+ fi
+
+ # playlist next line counter
+
+ if [ "$CNT" -gt "$totalLines" ]; then CNT=1; fi
+ if [ "$CNT" -lt "1" ]; then CNT=$totalLines; fi
+done
+
+exit 0
+
--- /dev/null
+#!/bin/bash
+
+if [ $# -lt 1 ]; then
+ echo "IM Media Player. Created for Interplaymedium™ project (https://interplaymedium.org)"
+ echo "Copyright © 2013 Dmitry Shalnov [interplaymedium.org]"
+ echo "Licensed under the Apache License, Version 2.0"
+
+ echo "Usage: $0 -i <media url or file> [-m <video mode>] [-s <shift in min>] [-v <volume amp in dB>] [-c <crop vertically in px>] [-r <aspect mode>] [-d <deinterlace mode>]"
+ echo "Dependences: omxplayer, youtube-dl, ttf-freefont, [bc]"
+ exit 1
+fi
+
+# ------------------ settings ----------------------------------------------
+
+# set screen resolution
+
+# media box
+#WIDTH=1024
+#HEIGHT=580 # 620
+#VERTICAL_COEFF="1.3" # my screen
+
+# IMAX edition TODO: stratching the image, need to be improved
+# HEIGHT=720
+
+# babooshka.tv
+
+WIDTH=720
+HEIGHT=576
+VERTICAL_COEFF="1.12" # babooshka SONY TV
+
+# other default settings
+
+SHIFTTIME=0
+VOLUME=0
+AUDIOTRACK=2
+SUBTITLES_SET=''
+DEINTERLACE_SET=''
+WINMODE_SET=''
+timeTotal=0
+
+# ------------ set environment ------------------------------------------------
+
+# if [ "$VIDEOMODE" != "0" ]; then
+# ./lght.sh 3
+# ./prjctr.sh 1
+# fi
+
+# ------------ parse commandline ----------------------------------------------
+
+while [ "$#" -gt 0 ]; do
+ case "$1" in
+ -i) MEDIAFILE="$2"; shift 2;; # media file
+ -m) VIDEOMODE="$2"; shift 2;; # video mode
+ -s) SHIFTTIME="$2"; shift 2;; # shift in minutes
+ -v) VOLUME="$2"; shift 2;; # volume amp
+ -a) AUDIOTRACK="$2"; shift 2;; # number fo track
+ -t) SUBTITLES="$2"; shift 2;; # number fo track
+ -c) CROP="$2"; shift 2;; # pixels froms all sides
+ -r) ASPECTMODE="$2"; shift 2;; # aspect mode (stretch, letterbox...)
+ -d) DEINTERLACE="$2"; shift 2;; # deinterlace
+
+ -*) echo "unknown option: $1" >&2; exit 1;;
+# *) handle_argument "$1"; shift 1;;
+ esac
+done
+
+# VIDEOMODE="720x576"
+
+VOLUME=$(( $VOLUME * 100 ))
+
+echo Audiotrack: $AUDIOTRACK
+
+# ------------ preliminary calculation ---------------------------------------
+
+# set aspect move
+
+if [ "$ASPECTMODE" != "" ]; then ASPECTMODE_SET=$ASPECTMODE; else ASPECTMODE_SET="stretch"; fi
+
+# set deinterlace move
+
+if [ "$DEINTERLACE" != "" ]; then DEINTERLACE_SET="-d --advanced $DEINTERLACE"; fi
+
+# set subtitles
+
+if [ "$SUBTITLES" != "" ]; then
+ SUBTITLES_SET="-t $SUBTITLES"
+ echo Subtitles: $SUBTITLES
+fi
+
+SHIFT=$(($SHIFTTIME*60))
+
+echo "Time shift: $SHIFT"
+
+startTime=$(date +%s)
+#interruptTime=$(($bt+$SHIFT))
+interruptTime=$(($bt))
+
+# ---------- helpful functions ----------------------------------------------
+
+round() {
+ echo $1 | awk '{split($0,a,"."); print a[1]}'
+}
+
+calc() {
+ # echo "$1" | bc -l
+ EXPR=$(echo "$1" | sed 's/ //g')
+ awk 'BEGIN { print ('$EXPR') }'
+}
+
+getMode () {
+
+# --- zona test workaround ---
+# width=720
+# height=360
+
+ if [ "$VIDEOMODE" != "" ]; then
+ width=$( echo $VIDEOMODE | awk '{split($0,a,"x"); print a[1]}')
+ height=$( echo $VIDEOMODE | awk '{split($0,a,"x"); print a[2]}')
+ else
+ width=$1
+ height=$2
+ fi
+
+# zoomCoeff=1
+# VERTICAL_COEFF="1.3" # my screen
+
+ vShift=0
+ hShift=0
+
+ height=$( calc "$VERTICAL_COEFF * $height" )
+
+ comp=$( calc " $width/$height > $WIDTH/$HEIGHT" )
+
+ if [ "$comp" == "1" ]; then
+# echo "calculate by width" >&2
+
+ zoomCoeff=$( calc "$WIDTH / $width" )
+ height=$( calc "$zoomCoeff * $height" )
+# width=1024
+ width=$WIDTH
+
+ vShift=$( calc "($HEIGHT - $height) / 2")
+ height=$( calc "$height + $hShift")
+ else
+# echo "calculate by height" >&2
+
+ zoomCoeff=$( calc "$HEIGHT / $height" )
+ width=$( calc "$zoomCoeff * $width" )
+# height=620
+ height=$HEIGHT
+
+ hShift=$( calc "($WIDTH - $width) / 2")
+ width=$( calc "$width + $hShift")
+
+ fi
+
+ vShift=$( round $vShift )
+ hShift=$( round $hShift )
+
+ height=$( round $height )
+ width=$( round $width )
+
+# echo "$hShift, $vShift, $width, $height" >&2
+
+ echo "--win $hShift,$vShift,$width,$height"
+}
+
+getTotalDuration(){
+ totalDuration=$( echo "$metaData" | grep 'Duration:' | head -1 | awk '{gsub(/\([^\)]*\)/, "");$1=$1}1' | awk '{split($0,a,","); print a[1]}' | awk '{split($0,a," "); print a[2]}' )
+ totalDurationInSec=$(echo "$totalDuration" | awk -F. '{print $1}' | awk -F: '{ print ($1 * 3600) + ($2 * 60) + $3 }')
+
+# echo "metaData :: \"$metaData\"" >&2
+# echo "$metaData" | grep 'Duration:' | head -1 >&2
+ echo $totalDurationInSec
+}
+
+getModeByMedia(){
+
+ metaData=$1
+
+ res=$( echo "$metaData" | grep 'Video:' | head -1 | awk '{gsub(/\([^\)]*\)/, "");$1=$1}1' | awk '{split($0,a,","); print a[3]}' | awk '{split($0,a," "); print a[1]}' )
+
+ width=$( echo $res | awk '{split($0,a,"x"); print a[1]}' | tr -d -c 0-9 )
+ height=$( echo $res | awk '{split($0,a,"x"); print a[2]}' | tr -d -c 0-9 )
+
+# echo ">>> $res, $width, $height" >&2
+
+ if [[ $CROP != "" ]]; then
+
+ cX=$(( 0 ))
+ cY=$(( $CROP ))
+ cX2=$(( $width ))
+ cY2=$(( $height - $CROP ))
+
+ cropMode=$(echo "--crop" $cX,$cY,$cX2,$cY2)
+
+ width=$(( $width + $CROP * 4 ))
+
+ fi
+
+ WINMODE_SET=$( getMode $width $height )
+
+ echo "$cropMode" "$WINMODE_SET"
+}
+
+# ---------------------- playback ----------------------------------------------
+
+
+ if [[ $MEDIAFILE == *"youtu.be"* ]]; then
+
+ # -------------- extracting youtube URL ------
+
+ echo "Extracting: $MEDIAFILE"
+ MEDIAFILE=$(wget -qO- "$MEDIAFILE" | grep "canonical" | awk '{string = index($0, "canonical"); print substr($0, string + 17, index($0, "alternate") - string - 13 - 17) }')
+ title=$(wget -qO- "$MEDIAFILE" | grep "canonical" | awk '{string = index($0, "<title>"); print substr($0, string + 7, index($0, "</title>") - string - 8 - 9) }')
+ echo "url: $MEDIAFILE"
+ echo "title: $title"
+ fi
+
+ if [[ $MEDIAFILE == *"vimeo"* ]]; then
+
+ # -------------- playing vimeo -------------
+
+ echo "Media file (vimeo): $MEDIAFILE"
+
+ vimeoID=$(echo "$MEDIAFILE" | awk -F '/' '{print $4}')
+
+ vimeoData=$( curl -k "https://player.vimeo.com/video/$vimeoID" )
+
+ # get video resolution and URL
+
+ widthHeight=$( echo $vimeoData | sed -e 's/[{}]/''/g' | awk -v k="text" '{n=split($0,a,","); for (i=1; i<=n; i++) print a[i]}' | grep "\"width\"\|\"height\"" )
+
+ width=$( echo $widthHeight | awk -F ' ' '{print $1}' | awk -F ':' '{print $2}' )
+ height=$( echo $widthHeight | awk -F ' ' '{print $2}' | awk -F ':' '{print $2}' )
+
+ if [ "$VIDEOMODE" != "0" ]; then
+ WINMODE_SET=$( getMode $width $height )
+ fi
+
+ echo "URL: $myUrl"
+ echo "Video: $WINMODE_SET, $ASPECTMODE_SET, $timeTotal"
+
+ myUrl=$( echo $vimeoData | sed -e 's/[{}]/''/g' | awk -v k="text" '{n=split($0,a,","); for (i=1; i<=n; i++) print a[i]}' | grep ".mp4" | grep "url" | awk -F '"' '{print $4}' | tail -1)
+
+ # play file
+
+ curl -k "$myUrl" | omxplayer pipe:0 $DEINTERLACE_SET --no-keys -b -o local --amp 0 --vol $VOLUME $WINMODE_SET --aspect-mode $ASPECTMODE_SET
+
+ elif [[ $MEDIAFILE == *"youtube"* ]]; then
+
+ # -------------- playing youtube -------------
+
+ echo "Media file (youtube): $MEDIAFILE"
+
+ if [ "$VIDEOMODE" != "0" ]; then
+ myUrl=$(youtube-dl -f 'bestvideo[vcodec=avc1][height<=720]+bestaudio/best[abr<=120]' -g "$MEDIAFILE") # best video + audio
+ metaData=$( omxplayer -i "$myUrl" 2>&1 )
+ WINMODE_SET=$( getModeByMedia "$metaData" );
+ else
+ myUrl=$(youtube-dl -f 'bestaudio/best[abr<=120]' -g "$MEDIAFILE") # best audio only
+ WINMODE_SET=''
+ fi
+
+ timeTotal=$(getTotalDuration "$metaData")
+
+ echo "URL: $myUrl"
+ echo "Video: $WINMODE_SET, $ASPECTMODE_SET, $timeTotal"
+
+ # play file
+
+ omxplayer -l 0:0:0 -b $DEINTERLACE_SET --amp 0 --vol $VOLUME -n $AUDIOTRACK -o local "$myUrl" $WINMODE_SET --aspect-mode $ASPECTMODE_SET --align center $SUBTITLES_SET
+
+ elif [[ $MEDIAFILE == *"http"* ]]; then
+
+ # -------------- playing remote file via http(s) ---------------
+
+ echo "Media file (URL): $MEDIAFILE"
+
+ # get video resolution
+
+ metaData=$( omxplayer -i "$MEDIAFILE" 2>&1 )
+ timeTotal=$(getTotalDuration "$metaData")
+
+ if [ "$VIDEOMODE" != "0" ]; then
+ WINMODE_SET=$( getModeByMedia "$metaData" )
+ fi
+
+ echo "WINMODE_SET (http): $WINMODE_SET"
+
+ if [[ $MEDIAFILE != *"24video"* ]] || [[ $MEDIAFILE != *"vibio"* ]]; then
+ MEDIAFILE="${MEDIAFILE/http:/https:}"
+ fi
+
+ echo "Video: $WINMODE_SET, $ASPECTMODE_SET, $timeTotal"
+
+ # play file (loop is broken stream workaround)
+
+ for iter in {1..6}; do
+ SKIPSEC=$(( ($interruptTime - $startTime + $SHIFT) * 128000 )) # ~128kbs ? TODO: get datarate from file
+ curl -k "$MEDIAFILE" | tail -c +$SKIPSEC | omxplayer pipe:0 $DEINTERLACE_SET -b --no-keys -o local $WINMODE_SET --amp 0 --vol $VOLUME $WINMODE_SET --aspect-mode $ASPECTMODE_SET
+ interruptTime=$(date +%s)
+ done
+
+ else
+
+ # -------------- playing local file ---------------
+
+ echo "Media file (local): $MEDIAFILE"
+
+ metaData=$( omxplayer -i "$MEDIAFILE" 2>&1 )
+ timeTotal=$(getTotalDuration "$metaData")
+
+ if [ "$VIDEOMODE" != "0" ]; then
+ WINMODE_SET=$( getModeByMedia "$metaData" )
+ fi
+
+ echo "Video: $WINMODE_SET, $ASPECTMODE_SET, $timeTotal"
+
+ # play file
+
+ omxplayer $DEINTERLACE_SET -l $SHIFT -b --amp 0 --vol $VOLUME -n $AUDIOTRACK -o local "$MEDIAFILE" $WINMODE_SET --aspect-mode $ASPECTMODE_SET --align center $SUBTITLES_SET
+
+ fi
+
+
+# -------------- environment ----------------------------------------------
+
+# turn off projector if playback time > 60 min
+
+endTime=$(date +%s)
+timeDif=$(( $endTime - $startTime ))
+echo "Playback duration: $timeDif/$timeTotal"
+
+# if [ "$timeDif" -gt "3600" ]; then
+# ./prjctr.sh 0
+# fi
+
--- /dev/null
+sudo systemctl reboot
\ No newline at end of file
--- /dev/null
+#!/bin/bash
+
+irw > /tmp/remote_command &
+
+CCONTROL_PID=$!
+
+# BABOOSHKA_HOME=/home/pi # assigned in start.babooshka.sh
+
+DBUS_CTRL_FILE=/tmp/dbuscontrol_command
+SAVEPATH=$BABOOSHKA_HOME
+
+# --------------------------------------
+
+killCCONTROL() { # function called by trap (Ctrl-C handler)
+
+ echo CCONTROL_PID $CCONTROL_PID
+
+ kill -9 $CCONTROL_PID 2> /dev/null
+ echo "Have a nice day..."
+ exit 0
+}
+
+trap 'killCCONTROL' 2
+
+# --------------------------------------
+
+beep (){
+ play -n synth sin %41 fade q 0.0 0.1 0.01 gain -25 &>/dev/null </dev/null &
+}
+
+prevData=0
+musicPlay=0
+pressCnt=0
+
+while [ 1 ]; do
+
+ data=$(stdbuf -i0 -o0 -e0 tail -1 /tmp/remote_command | awk -F' ' '{print $3; exit}' | xargs )
+
+ pressCnt=$(($pressCnt + 1))
+
+ # ---- note repeatable -----
+
+ if [ "$prevData" != "$data" ]; then
+
+ case "$data" in
+ "qqqq")
+ $BABOOSHKA_HOME/dbuscontrol.sh stop
+ echo qqqq
+ ;;
+ "wwww")
+ echo wwww
+ ;;
+ esac
+
+ prevData=$data
+ fi
+
+ # ---- repeatable ---------
+
+ case "$data" in
+
+ # next
+
+ "ARR_DOWN")
+ beep
+ echo "NEXT" > "$DBUS_CTRL_FILE"
+ $BABOOSHKA_HOME/dbuscontrol.sh stop
+ echo "NEXT"
+ ;;
+
+ # prev
+
+ "ARR_UP")
+ beep
+ echo "PREV" > "$DBUS_CTRL_FILE"
+ $BABOOSHKA_HOME/dbuscontrol.sh stop
+ echo "PREV"
+ ;;
+
+ # forward +10min
+
+ "ARR_RIGHT")
+ beep
+ echo "NEXT" > "$DBUS_CTRL_FILE"
+ $BABOOSHKA_HOME/dbuscontrol.sh seekfl
+ echo ">>"
+ ;;
+
+ # backward -10min
+
+ "ARR_LEFT")
+ beep
+ $BABOOSHKA_HOME/dbuscontrol.sh seekbl
+ echo "<<"
+ ;;
+
+ # play/pause toggle
+
+ "ARR_OK")
+ beep
+ status=$(./dbuscontrol.sh status 2>/dev/null)
+
+ if [ "$status" != "" ]; then
+ position=$( echo "$status" | grep Position | awk '{split($0,a,":"); print a[2]}' )
+ position=$(( $position / (1000000) )) # sec
+ echo $position > $SAVEPATH/currentpos
+ paused=$( echo "$status" | grep Paused | awk '{split($0,a,":"); print a[2]}' | xargs )
+ fi
+
+ if [ "$paused" == "true" ] || [ "$status" == "" ]; then # has been paused
+ echo "PLAY"
+ if [ "$status" == "" ]; then echo "PLAY" > "$DBUS_CTRL_FILE"; fi
+ else
+ echo "PAUSE"
+ fi
+ $BABOOSHKA_HOME/dbuscontrol.sh pause
+ ;;
+
+
+ # pause on switching-off
+
+ "EXT"|"ON_OFF") # AV or ON_OFF
+ beep
+
+ status=$(./dbuscontrol.sh status 2>/dev/null)
+
+ if [ "$status" != "" ]; then
+ position=$( echo "$status" | grep Position | awk '{split($0,a,":"); print a[2]}' )
+ position=$(( $position / (1000000) )) # sec
+ echo $position > $SAVEPATH/currentpos
+ paused=$( echo "$status" | grep Paused | awk '{split($0,a,":"); print a[2]}' | xargs )
+ fi
+
+# paused=$( echo "$status" | grep Paused | awk '{split($0,a,":"); print a[2]}' | xargs )
+
+ if [ "$paused" == "false" ]; then # not paused
+ $BABOOSHKA_HOME/dbuscontrol.sh pause
+# echo "$status" > status
+ echo "PAUSED"
+ fi
+ echo "AV or ON-OFF"
+ ;;
+
+ # stop
+
+ "KEY_TEXT")
+ beep
+
+ status=$(./dbuscontrol.sh status 2>/dev/null)
+
+ if [ "$status" != "" ]; then
+ position=$(echo "$status" | grep Position | awk '{split($0,a,":"); print a[2]}' )
+ position=$(( $position / (1000000) )) # sec
+ echo $position > $SAVEPATH/currentpos
+
+ echo "STOP" > "$DBUS_CTRL_FILE"
+ $BABOOSHKA_HOME/dbuscontrol.sh stop
+ echo "STOP"
+ else
+ echo "STOP / NOT PLAYING"
+ fi
+
+ ;;
+
+ # audio track switch
+
+ "KEY_RED")
+ audioTracks=$( $BABOOSHKA_HOME/dbuscontrol.sh audiolist 2>/dev/null )
+ trackCnt=$( echo "$audioTracks" | sed '/^\s*$/d' | wc -l )
+ currentTrack=$( echo "$audioTracks" | awk '/active/{ print NR; exit }' )
+ beep
+ if [ "$trackCnt" != "0" ]; then
+ if [ "$currentTrack" -lt "$trackCnt" ]; then
+ $BABOOSHKA_HOME/dbuscontrol.sh audiop
+ echo "AUDIO CHANGE"
+ else
+ for var in $audioTracks; do
+ $BABOOSHKA_HOME/dbuscontrol.sh audiom
+ done
+ echo "AUDIO REVIND"
+ fi
+ fi
+ echo "AUDIO: $trackCnt, $currentTrack"
+ ;;
+
+ # subtitles switch
+
+ "KEY_YELLOW")
+ subsTracks=$( $BABOOSHKA_HOME/dbuscontrol.sh subslist 2>/dev/null )
+ subsCnt=$( echo "$subsTracks" | sed '/^\s*$/d' | wc -l )
+ currentSub=$( echo "$subsTracks" | awk '/active/{ print NR; exit }' )
+ beep
+ if [ "$subsCnt" != "0" ]; then
+ if [ "$currentSub" -lt "$subsCnt" ]; then
+ $BABOOSHKA_HOME/dbuscontrol.sh subsnext
+ echo "SUBS CHANGE"
+ else
+ if [ "$subsOff" != "1" ]; then
+ $BABOOSHKA_HOME/dbuscontrol.sh hidesubtitles
+ subsOff=1
+ echo "SUBS HIDE"
+ else
+ $BABOOSHKA_HOME/dbuscontrol.sh showsubtitles
+ for var in $subsTracks; do
+ $BABOOSHKA_HOME/dbuscontrol.sh subsprev
+ done
+ subsOff=0
+ echo "SUBS REVIND"
+ fi
+ fi
+ fi
+ echo "SUBS: $subsCnt, $currentSub"
+ ;;
+
+ *)
+# echo ------
+ ;;
+ esac
+
+ : > /tmp/remote_command
+
+ sleep 0.5
+done
+
+
+
+
+
--- /dev/null
+#!/bin/bash
+
+if [ $# -lt 1 ]; then
+ echo "Usage: $0 <playlist>"
+ exit 0
+fi
+
+PLAYLIST=$1
+
+VIDEO="VIDEO/"
+DOWNLOADED_VIDEO="YOUTUBE/"
+
+if [ ! -d "$VIDEO" ] || [ ! -d "$DOWNLOADED_VIDEO" ]; then
+ mkdir "$VIDEO"
+ mkdir "$DOWNLOADED_VIDEO"
+ echo "$VIDEO and $DOWNLOADED_VIDEO directories has been created. Use them to upload video files to make playlist updated automatically."
+fi
+
+IFS=$'\n';
+
+while [ 1 ]; do
+
+ VIDEO=$(find "$VIDEO" -type f)
+ YOUTUBE=$(find "$DOWNLOADED_VIDEO" -type f | grep -v ".part")
+
+ for file in $VIDEO; do
+
+ if ! grep "$file" "$PLAYLIST" >/dev/null; then
+ echo "$file" >> "$PLAYLIST"
+ echo "VIDEO playlist updated: $file"
+ fi
+ done
+
+ for file in $YOUTUBE; do
+
+ if ! grep "$file" "$PLAYLIST" >/dev/null; then
+ echo "$file" >> "$PLAYLIST"
+ echo "YOUTUBE playlist updated: $file"
+ fi
+ done
+
+ sleep 60
+done
--- /dev/null
+#!/bin/bash
+
+export BABOOSHKA_HOME=/home/pi/BABOOSHKA.TV/
+
+cd "$BABOOSHKA_HOME"
+
+# ./leds.sh # added to early_init.sh
+./remoteir.sh & # 2>&1 >/tmp/remoteir.log &
+./renewplaylist.sh playlist 2>&1 >/tmp/babooshka.log &
+
+sleep 1
+
+echo BOOTCOMPLETE > /tmp/bbshk_leds
+
+./playlist.sh -p playlist -m 720x576 -o 2>&1 >/tmp/babooshka.log
Dmitry Shalnoff's Git Repository / BABOOSHKA.TV / commitdiff
